1004G
POWER PACK ROTARY PUMP
40 kWm 1500 rev/min
44 kWm 1800 rev/min
1004G
POWER PACK ROTARY PUMP
40 kWm 1500 rev/min
44 kWm 1800 rev/min
●High Power Density
Power output and Jorque per liter aresuperior to normal level with optimizedstructure strengthening.
●Low Fuel Consumption
The excellent combustion system can reduce fuel consumption,emission and noise, meanwhile increase engine power output.
●Easy Maintenance
All routine service items are situated on the right hand side of engine allowing easy maintenance and minimum machine downtime.
●Durability & Reliability
Start normally at -10'C without preheated device, start smoothly at-25'C through flame glow plug cold start aid.
Maximum cooling efficiency is provided by a gear driven water pump and independent fan drive. Leakfree operation is ensured by Viton crankshaft seals and sophisticated controlled swelljoints, giving protection in the toughest conditions.
Engine Speed (rev/min) | Type of Operation | Typical Generator | Engine Power | ||||
Gross | Net | ||||||
kVA | kW | kWm | bh | kWm | bh | ||
1500 | prime power | 44.4 | 35.5 | 42.0 | 56.3 | 40.0 | 53.6 |
standby power | 48.4 | 39 | 46.0 | 61.6 | 44.0 | 59 | |
1800 | prime power | 49 | 39 | 47.0 | 63.0 | 44.0 | 59.0 |
standby power | 53.3 | 42.6 | 51.0 | 68.3 | 48.0 | 64.3 |
Rating Base: Iso 8528, GB/T2820
Lubricating oil: API C
Standard Specification
Air inlet
Mounted air filter and turbocharger
Fuel system
Rotary pump
Spin-on full flow fuel filter and pre-filter
Lubrication system
Flat bottomed iron sump Spin-0n
full flow oil filter Oil cooler
Cooling system
Thermostat controlled cooling system、with gear driven water pump
Radiator
20"belt-driven pusher fan and guards
Electrical system
12 volt starter motor and alternator Oil
pressure and water temperature switch & sensor
1 2 volt shut down solenoid
Flywheel and housing
High inertia flywheel, size :10/11 vz
SAE3 flywheel housing
Mountings
Front engine mounting bracket
Optional Equipment
24 volt alternator
24 volt starter motor